About Us

• 
  
  YAK88-C Reference
  YAK88-C Computer Controlled Bending System:
  1. YAK88-C Bending System is easy to learn and operation, it could finish the work depending on the DXF AUTOCAD figures.
  2. YAK88-C Could do Bending, Bridging, Cutting, Lipping at the same work time, it?s really automatic bending machine.
  3. YAK88-C has the system can bend the high precision and difficult designs and also bend them very accurate and fast.
  YAK88-C Bending System.
  1. Feeding &＃8212; Use the roll feeding system, could feed the steel rule very fast and accurate.
  2. Cutting &＃8212; Automatic Cutting.
  3. Bridging &＃8212; Automatic Bridging.
  4. Lipping &＃8212; Automatic Lipping.
  5. Bending &＃8212; Use firmware Bending system, could bend the boxes, toys, electronics perfectly.
  6. Cutting &＃8212; Use bender cutting, easy to cut the steel rule.
  7. Rule Rest &＃8212; Use the single rule rest, could move two side to ensure the clockwise or anticlockwise Rule Trays.
  8. Software &＃8212; English interface is easy to learn and operate.
  9. Steel Rule &＃8212;Thickness, 1PT (0.45mm), 1.5PT (0.53mm), 2PT 0.71mm), 3PT(1.07mm).  Height, 7mm -- 30mm.