Company Description
Ceramic reflectors are recently used in laser pump chambers. Its main advantages are long life time.
Description
A porous alumina ceramic of 99.7% Al2O3 content, used extensively for long-life laser reflectors. This material is sintered at high temperatures to achieve a controlled porosity.
Prime features
Surfaces can be sealed and coated with a solarization-resistant glaze to give high bulk refectivity
97.8% reflectance efficiency at 1000nm
Reflectance efficiency exceeds 96% across the wavelength range 500-2000nm (see curve)
Controlled porosity
Good thermal conductivity
High electrical resistivity
Typical applications
Pumping chambers for ND: YAG lasers _ low to high po
DOCERAM Ultimate Ceramic Co.,Ltd.r, single or multiple lamp designs. Pumping chamber reflectors of this material are virtually indestructible, and prove a highly cost effective alternative to metal coated types.
Specifications
Quality Assurance to BS EN 9001: 2000
Production capabilities
Components up to 250mm long and 80mm wide/diameter manufactured as standard
Larger components manufactured to development contracts
One-piece or split-cavity designs
Prototype, batch and volume production.
Physical properties*
Color: White
Bulk density (fired), Mg/m3: 3.2
Porosity (apparent), % nominal: 20
Flexural strength (ASTM C1161, 3-point), MPa: 150
Thermal expansion coefficient
200-500C, 10-6/C 7.9
200-1000C, 10-6/C 9.0