Company Description
shanghai laser tube factory; laser tube factory from china; CO2 laser tube; Puri laser tube?CO2 laser tube 60w?CO2 laser tube?Puri 120 laser tube?Puri laser tube 120w; laser tube 120w; laser tube 150w?120 laser tube; 150w laser tube ; shanghai laser tube factory?laser tube factory from china?120w puri laser tube?150w puri laser tube?puri 150w laser tube?120w laser tube?150w laser tube; 150w puri co2 laser tube?120W co2 laser tube; 150 co2 laser tube;
The Shanghai Puri 120W-160W small&medium po
Goldensign International Technologyr CO2 laser tube mainly used for laser engraving and cutting, applies to the vast majority of domestic the laser machinery manufacturing. Puri laser tube with middle & small is excellent in good laser spot mode, enough power, long life, etc..?
??Working Principle: high-pressure discharge stimulate high concentration CO2 to generate laser.
??Laser Wave Length: 10.6um?
??Laser Mode:low order mode. Water-Cooling?purified water, appropriate temperature 10-35?.
??Working Environment:temperature 5-35?, humidity 10-60%, clean environment, no serious pollution.
??Working Current:25~30mA is appropriate (excessive current will affect laser power and laser tube lifetime.
??Safety Demand:CO2 laser tube outputs invisible light, positive with high pressure, if necessary, eyewear is essential.
??Laser State: Laser power will be attenuated when the laser tube is used at a certain time; If the laser is pink, it is in normal condition; if the laser is white, it means the laser power is attenuate. ( Laser tube is consumable, please change a new one when it can?t meet demand due to attenuation. )
??Laser State:
1? There are two points to support the laser tube at two sides, when you install the laser tube, the two points should be in 1/4 of the laser tube;
2?On the basis of cooling water above-in and below-out, if you rotate the laser tube slightly, it will affect laser spot and laser power.
??Puri CO2 Laser Tube Parameter: (Testing & Waiting):
Model/Length
(m