Hangzhou Ilift System.Co.,Ltd

Company Description

Hangzhou ilift provide Screw driver lift,and iLIFT is different from traditional traction lift and hydraulic elevator, it applies screw drive system, it ?s very easy to install and simple control and beautiful in appearance with safe use than tranditional evelator;
      The iLIFT can be installed into new or existiong buildings with a minimum of disruption. With only a 50mm pit and virtually on builders work, intallation can usually be completed in just a few days.
      The smooth shaft enclosure consistes of either double skinned insulated steel panels or 8mm laminated safety glass within an aluminium alloy framework. The aluminium is avaliable in a veriety of rich finishes to suit the style and individuality of building into which it is installed
       No oil contaminating/Accordant with EN81-41 code

Main Specification
Load capacity:250kg/300kg/400kg
Speed:0.15m/s
Maximum Trevel High:9m  
Maximum Stop:6 Stops
Door size:800 X2000mm(250kg type)/900 X2000mm(300kg and 400kg type)
Platform size:800 X1270mm(250kg type)/1100 X1420mm(300kg type)/900 X1420mm(400kg type)
Pit depth:50mm
Overhead:2400mm
Drive System:Screw driver with back up nut
PoHangzhou Ilift System.Co.,Ltdr supply:220V AC 50HZ
Entrance:Single , Through
Door type: Auto or Manual open

Safety Feature
1.Overload Protection
2.Emergency Illumination
3.Telephone:Allows for communication in the event of an emergency
4.Alarm Button on COP
5.The L style lift platform is equipped with a raised edge system. When it?s pressed down, the lift will stop to ensure safety
6.Door Opening/Closing Protection:When the door is met by a physical obstruction, the door will stop moving.
7.Power Failure Emergency Device