Ozone generator

In aquaculture，how to setrilize water by ozone effectively? Following the following three principles of using ozone can effectively kill bacteria in water and improve the survival rate of seedlings Ozone (O3) is the isomer of oxygen (O2). The reduction reaction takes place in water all the time, and the intermediate substances monoatomic oxygen (o) and hydroxyl (OH) are produced. The oxidation ability of monoatomic oxygen (o) is very strong. Setp 1: The water after natural sedimentation in sedimentation tank and sand and stone filtration is mixed into ozone and sent to seedling pond. At this time, CO3 in each liter of water is not less than 0.2mg, that is, 0.2ppm. （In water 1PPM=1mg/L, while in air, 1PPM=2.14mg/m3，do not know why? [email protected] has an answer for you） Step 2: When air is pumped into the water of nursery pool to increase oxygen, ozone is added regularly every day to purify the water and eliminate bacteria, viruses and other pollutants brought in by feeding. When adding ozone, the purification effect is intuitive, the water in the pool is clear, does not stink, and does not have too much algae Step 3: Ozone is used to sterilize the air in the field, disinfect and remove peculiar smell, so as to keep the air pumped into the pool in a hygienic state Ozone output 300g/h Rated current 17A Ozone current 15A Power 3700W Voltage 220-240V Frequency 50Hz Temperature <45℃ Humidity <85% Pressure <0.2Mpa Oxygen source 40-50/min Ozone outlet interface G1/2 Cooling water inlet 1/2G Cooling water outlet 1/2G Weight 150KGS Size(mm) 900*470*1400 Cable 3*1.5mm2 side Meanwhile ozone can react with lipid double bond of bacterial cell wall. It penetrates into the bacterial body, acts on lipoproteins and lipopolysaccharides, changes the permeability of cells