Barsa

Company Description

The 210 comes with a 3 prong industrial poBarsar cord already installed.  It also comes with a 10 foot ground cable with clamp.  A 12 foot 250 amp M25 mig gun that is suited best to .030 to .035 gauge wire and has 3 tips for both sizes included.  On the drive system for the wire, it's an industrial grade quick drive system that requires no tools to switch wire diameter, the included drive rolls are for .030 and .035 wire. The running gear is factory installed so you don't have to worry about bolting on the casters and main wheels, just to move it around.  It also has a very useful flip out gun and cable holder which is built into the case.  This not only holds both the M25 mig gun and the Spoolmate 3035 spool gun, but serves to keep your cables off the floor and out of the way.  This welder is designed to weld steel, aluminum, and or stainless steel.  For steel welding with a shielding gas you can use CO2 or an Argon CO2 mixture. Note: with this welder you can use a flux core wire to weld steel and use no shielding gas
The 210 has the highest rated welding output in its class.  30 to 210 amps of output on a seven position adjustable tap.  You can weld from  a range of 22 gauge sheet metal up to 3/8 inch thick steel with one pass.  The 210 has a 60% duty cycle at 160 amps. Duty cycle is the amount of minutes you can weld in a 10 minute time period.  So 6 minutes out of 10 is a 60% duty cycle (which is quite a bit of time). Should you exceed the duty cycle or should the air flow or cooling be restricted, the unit will automatically shut down to keep from damaging itself and restart when it cools back off.
It also comes with the Spoolmate 3035
Spoolmate 3035 comes with 20 feet of wire and hose for connecting to the Millermatic 210. The gun controls and cables attach in a matter of minutes.  All you need to do is add another regulator and the appropriate gas for the material you're welding and you're ready to go.
E-mail me for pic at e-mail
Thanks!