Jenova Silicone., Ltc

Company Description

Jenova silicone had focused on RTV-2 mold making silicone rubber since 1994.
There are two kinds of mold making silicone rubber in Jenova Silicone., Ltc, which are condensation cured
silicone and addition cured silicone according to their different curing system and applications.
These two type of silicone rubber could be applied to make mold for casting material as below
Urethane Plastic
Urethane Rubber
Epoxy
Polyester
Fiberglass
Resin
Plaster/Gypsum
　　Soap
Wax
Low melt metals (up to 400 degrees Max)
HydroCal White
Hydrocal, Hydrostone
　　Cement, Concrete and so on.

Condensation-cured silicone rubber,also called tin-cured silicone rubber,are two components which can cure at room temperature (RTV) ,with the features of good flexibility ,high tear-strength ,suitable viscosity which could be used to make mold in pouring way and brushing way.
It could be used to reproduce the large size products (≥1 meter) with complicated patterns,also for the moderate and small size .
Its typical applications are as below:
　　Resin and polyresin casting with different size.
　　big plaster or gypsum sculpture Casting ;
Decorative Moldings like Ceiling Domes, Pilaster, Balustrade , Faux stone, Faux rock, Concrete garden furniture and fountains,Cladding stone etc.
　　Shoe soles molding
　　Ceramic art and porcelain replicate
　　Palaeontology and fossil reproduction
　　Jewellery lost wax master moulds
　　Candle mould reproduction
　　Soap mould reproduction
　　Tire molding
　　Manual mould design
　　And so on.
　　

Jenova Platinum cured silicone rubber is two components,and cured at room temperature.
Platinum cured silicone is with many good features: high tear resistance, long mold life, virtually no shrinkage, high dimensional stability over time, non-deformability and excellent reproduction of fine detail,also odourless and non toxic etc.
With their different characters choose from, Jenova Platinum cured silicone rubber offers tremendous versatility and are suitable for making production molds of any configuration, large or small.

Materials like Urethane Plastic, Urethane Rubber, Polyester, Fiberglass Resin, Plaster, Concrete, Cement, Wax or Low melt metals (up to 400 degrees Max) could cast into enova Platinum cured silicone rubber good demoulding effect.

The detailed applications are as below:
　　big plaster or gypsum sculpture Casting ;
Decorative Moldings like Ceiling Domes, Pilaster, Balustrade , Faux stone, Faux rock, Concrete garden furniture and fountains,Cladding stone etc.
　　Shoe soles molding
　　Ceramic art and porcelain replicate
　　Palaeontology and fossil reproduction
　　Jewellery lost wax master moulds
　　Candle mould reproduction
　　Soap mould reproduction
　　Tire molding
　　Manual mould design
　　And so on.

　　Jenova Platinum cured silicone rubber also could use for Rapid prototyping, silicone dolls making, silicone Adult Sex Toy making, lifecasting for film,TV,and theatre, such as Bloody zombie mask, giant scary clown Halloween costume mask prop,and food molds for chocolate,candy ,cake and so on.


Our mission is to