About Us

• Liaocheng All Win Chemicals Co.,ltd liaocheng all win chemicals co.,ltd based in , China. We are member of Tradekey.com since August, 2010. Our business is related to Chemicals industry and we specifically deal in paint raw matericals textile matericals water treatment,cleaning raw matericals,fertiliers. Please find our product details below: Polyaluminium Chloride Features: 1) Made from pure raw material 2) Used for drinking water treatment and paper mills as retention agent 3) Appearance: Solid powder, white 4) Al2O3: 29% (min. ) 5) Basicity: 50.0% ~ 85.0% 6) Insolubles: 0.5% (max. ) 7) PH (1% water solution): 3.5 ~ 5.0 8) SO42-: 3.5% (max. ) 9) N: 0.09% (max. ) 10) As: 0.0005% max 11) Mn: 0.045% (max. ) 12) Cr6+: 0.0015% (max. ) 13) Hg: 0.00002% (max. ) 14) Pb: 0.003% (max. ) 15) Cd: 0.0006% (max. ) 16) Fe: 0.008% (max. ) PROPERTIES 1. Its dosage lower than aluminum sulfate (based on Al2O3) and water treatment cost is lower than other inorganic flocculants. 2. The product can cause quick formation of flocs, big flocs formation and rapid precipitation. Its treatment capacity is 1.3-3.0 times of other inorganic flocculants. 3. It enjoys wide-range adaptability for different-temperature source water and a good solubility. 4. It is slightly corrosive and easy for operation. 5. The liquid product is suitable for automatic dosing. Furthermore, it will not block pipes over long-time Usage. PACKAGE AND STORAGE 1. The solid product is packaged in 25kg polypropylene woven bagswith inner plastics bags. 2. The liquid product can be stored for one year without losing its effect, while the solid product, for two years. The product should be stored in a dry and ventilative room, but the effect will not be affected even if it gets wet. Carboxymethyl Cellulose (CMC) Product Description This product is a viscosifier with anti -salt performance, which also is a filtrate reducer, belong to be an anionic cellulose ethers. ADVANTAGES: 1. Extended maintenance cycle of the mud. 2. Can be soluble in water, good thermal stability, and salt-tolerance, strongly anti-bacterial. 3. Good filtration, inhibition and resistant high temperature. 4. Can be prepared for work over drilling fluid and fracturing fluid 5. After adding CMC into the mud, the drilling rig can get low zero gel so that the mud release the gas, which is easy to remove the solid phase. USAGE AND DOSAGE: The product can be used alone, also can be combined with other products. The dosage is 0.5% ~ 1%, also can be added in accordance with the actual situation at the scene. Adding slowly while stirring, We can also be added with aqueous solution. Package and Storage The product is packaged in three-in-one plastic enhanced brown paper bag, with PE bag inside. Its net weight is 25 kg. The product should be against moisture and breakage of package. Its guarantee period is two years. REQUIREMENT INDEX Appearance Free flowing white or yellow powder, non-caking distilled water 4% brine saturated saline Base mud Filtration , ml 60±10 90±10 90±10 Apparent viscosity , mpa.s ≤6 ≤6 ≤10 pH value 8.0±1.0 8.0±1.0 8.0±1.0 HV-CMC The rate of mud made, m3/t ≥200 ≥150 ≥160 LV-CMC Filtration volume is 10ml Adding , g/l ≤7.0 ≤10.0 Apparent viscosity , mpa.s ≤4.0 ≤6.0 MV-CMC Adding , g/l 6.0 14.0 3.5 Apparent viscosit , mpa.s ≥15 ≥15 ≥15 Filtration , ml ≤9 ≤9 ≤9 Carboxymethyl Cellulose (CMC) Product Description This product is a viscosifier with anti -salt performance, which also is a filtrate reducer, belong to be an anionic cellulose ethers. ADVANTAGES: 1. Extended maintenance cycle of the mud. 2. Can be soluble in water, good thermal stability, and salt-tolerance, strongly anti-bacterial. 3. Good filtration, inhibition and resistant high temperature. 4. Can be prepared for work over drilling fluid and fracturing fluid 5. After adding CMC into the mud, the drilling rig can get low zero gel so that the mud release the gas, which is easy to remove the solid phase. USAGE AND DOSAGE: The product can be used alone, also can be combined with other products. The dosage is 0.5% ~ 1%, also can be added in accordance with the actual situation at the scene. Adding slowly while stirring, We can also be added with aqueous solution. Package and Storage The product is packaged in three-in-one plastic enhanced brown paper bag, with PE bag inside. Its net weight is 25 kg. The product should be against moisture and breakage of package. Its guarantee period is two years. REQUIREMENT INDEX Appearance Free flowing white or yellow powder, non-caking distilled water 4% brine saturated saline Base mud Filtration , ml 60±10 90±10 90±10 Apparent viscosity , mpa.s ≤6 ≤6 ≤10 pH value 8.0±1.0 8.0±1.0 8.0±1.0 HV-CMC The rate of mud made, m3/t ≥200 ≥150 ≥160 LV-CMC Filtration volume is 10ml Adding , g/l ≤7.0 ≤10.0 Apparent viscosity , mpa.s ≤4.0 ≤6.0 MV-CMC Adding , g/l 6.0 14.0 3.5 Apparent viscosit , mpa.s ≥15 ≥15 ≥15 Filtration , ml ≤9 ≤9 ≤9 Sodium Metabisulphite 64% Product Description Product Description Specifications: Sodium Metabisulphite 64% Sodium Metabisulphite (As SO2), %>=------64 Fe %<=---------------0.005 Water-insoluble Matter%<=-----------0.05 pH ---------------------4.0-4.6 Sodium Metabisulphite 64% Food Grade Sodium Metabisulphite (As SO2), %>=--------------64 Fe, %<=---------------------0.005 Water-insoluble Matter, %<=---------------0.05 pH -----------------4.0-4.6 Pb%<=-----------------0.002% As%<=--------------0.0002% Appearance: White powder Applications: It is used as a food additive, leaching agent for textile fibres; Colors stripper and dechlorination; Preparation of Indigo Vat Dye; Solubilizing and acidyfing agent for leather industries; Bleaching agent for paper pulps; Preservative and sterilisation agent for food industries Packing: 25 kg in net PP bag, 20MT in the 20&＃039;FCL Thank you for taking the time to go through our business profile. If there are any question, inquiry or comments, please feel free to contact us.