Lubricant additive Gasoline Engine Oil Additive Package T3062 (1)Introduction And Application ·Under the grade SJ gasoline engine oil was modulated by this product can be used in class I and II base oil. ·Gasoline engine oil can be modulated by the adding amount of 7.0% of this product can meet the performance requirements of grade API SL. (2)Dosage Reference Quality Level Additive Dose(m %) SL 7.0 SJ 6.2 SG 5.5 SF 4.2 (3)Quality Index Item Quality Index Test Method Density(20℃), g/ cm3 0.9-1.2 GB/T2540 Kinemaitc Viscosity(100℃),mm2/s Report GB/T265 Flash Point(Open) ℃ ≥170 GB/T3536 Ca % ( m/m) ≥2.2 SH/T0270 Zn % ( m/m) ≥1.0 SH/T0226 TBN % ( m/m) ≥75 SH/T0251 (4)Storage According to the requirements of SH/T0164,the maximum temperature should not exceed 75℃ for the storage,handling of the product and preparation of oil;for long-term storage.the maximum temperature should not exceed 45℃. The product is non-flammanle,non-explosice and non-corrosive.No special preventation measure is required during safety,environmental protection and use ,it’s equal to general petroleum products. (5)Packing Net Weight:180Kg/Iron Drum. CONTACT:NAME:Belinda Skype: dgbelinda at 163 dot com Wechat:hyy519925253 Whatsapp:008613718593072