Sonar Machine Tool

Company Description

Sonar Machine Tool Sonar Machine Tools based in Rajkot , India. We are member of Tradekey.com since June, 2010. Our business is related to Industrial Machinery industry and we specifically deal in . Please find our product details below:Hydraulic Press BrakeCapacity: 80 Tones to 400 Tones. Bending capacity:2000mm to 4000mm. Thickness of bending: 3.0mm to 16.0mm(ms). Two hydraulic cylinders mounted at rear side, operated through levers. Longer strokes with full tonnage availability throughout the stroke enables use of combination tooling and versatile operation. Instant ram stoppage and quick reverse reduce the chances of accidents and helps avoiding rejections. Mode of operations like inching, single cycle & auto cycle. Front end mounting clawis with spherical bearing. Rear end mounting clawis with pin bush. Cylinder tube cold drawn ST 52 grade alloy steel. Piston rods are made from EN 8 (D) Carbon steel, induction hardened, hard chrome plated cylindrically ground 2 times for a lasting seal life and anti corrosion. Piston one piece carbon steel construction with standard design tolerances and suitable sealing. Glands from special grade steel and easily fetted & removable without dimension the cylinder, We are using imported seals of DLI, BELLIED, B+H etc. It is made up of PTFE components BFT, Polyurethane, Nitrial rubber for better performance.Hydraulic Press BrakeCapacity: 80 Tones to 400 Tones. Bending capacity:2000mm to 4000mm. Thickness of bending: 3.0mm to 16.0mm(ms). Two hydraulic cylinders mounted at rear side, operated through levers. Longer strokes with full tonnage availability throughout the stroke enables use of combination tooling and versatile operation. Instant ram stoppage and quick reverse reduce the chances of accidents and helps avoiding rejections. Mode of operations like inching, single cycle & auto cycle. Front end mounting clawis with spherical bearing. Rear end mounting clawis with pin bush. Cylinder tube cold drawn ST 52 grade alloy steel. Piston rods are made from EN 8 (D) Carbon steel, induction hardened, hard chrome plated cylindrically ground 2 times for a lasting seal life and anti corrosion. Piston one piece carbon steel construction with standard design tolerances and suitable sealing. Glands from special grade steel and easily fetted & removable without dimension the cylinder, We are using imported seals of DLI, BELLIED, B+H etc. It is made up of PTFE components BFT, Polyurethane, Nitrial rubber for better performance.Thank you for taking the time to go through our business profile. If there are any question, inquiry or comments, please feel free to contact us.