T S BRIQUETTES

Company Description

(MOB.)+91-9415039448 , +91-9336256680 Biomass Briquetting is the process of converting low bulk density biomass into high density and energy concentrated fuel briquettes. Biomass Briquetting plants are of various sizes which converts biomass into solid fuels. Briquettes are ready substitute of Coal/wood in industrial boiler and brick kiln for thermal application. Biomass briquettes are Non conventional ST S BRIQUETTESce of energy, Renewable in nature, Eco friendly, non polluting and economical. Process of converting biomass to solid fuel is also non-polluting. No addition of any binder / chemicals is required so it is 100 % natural. Briquettes have high specific density (1200 Kg/m3) and bulk density (800 Kg/m3) compared to 60 to 180 Kg/m3 of loose biomass. These can stand the ardors of long distance transport. Loading/unloading and transportation costs are much less and storage requirement is drastically reduced. Compared to fire wood or loose biomass, briquettes give much higher boiler efficiency because of low moisture and higher density. Briquettes produced from briquetting of biomass are fairly good substitute for coal, lignite, firewood and offer numerous advantages: • Briquettes are cheaper than coal. • Oil, coal or lignite, once used, cannot be replaced. • High sulfur content of oil and coal, when burnt, pollutes the environment. There is no sulfur in Briquettes. • Biomass briquettes have a higher practical thermal value and much lower ash content (2-10% as compared to 20-40% in coal). • There is no fly ash when burning briquettes. • Briquettes have consistent quality, have high burning efficiency, and are ideally sized for complete combustion. • Combustion is more uniform compared to coal and boiler response to changes in steam requirements is faster due to higher quantity of volatile matter in briquettes.