PRODUCT DESCRIPTION Ceramic Condenser Cavity Mould Laser Welding Machine 1064nm Wavelength Product introdution: While TIG(tungsten inert gas) welding may be the preferred option for many factory mold welding, high power pulsed laser welding is a high quality process that can provide a repaired mold that behaves as if it were new. Repairing a worn mold is always cheaper than replacing it. Plastics processors will find that the alternative method of pulsed laser welding provides better results with less damage to the base material, so the mold will produce better quality parts and significantly longer service life after repair. Advantages and features: Ability for molds to be repaired multiple times Quicker repair of molds with much faster machining or bench time Portable and flexible to reach almost any feature, even in large molds Less expensive from a total-cost perspective and lasts longer Product parameters: Model No ML-WY-M02 Mode (CW or Pulse) Pulse Power 400w Laser gain media NO TEMoo NA Max Energy per pulse (Joule) 15J Pulse Duration (sec) 0.1S Pulse repetition frequency (Hz) ≤50Hz Wavelength (nm) 1064NM Minimal Spot Size (mm) 0.2MM Exit Laser beam or beam diameter at Lens (mm) 0.2-2mm Focal Length (mm) 90mm Beam Divergence (mrad) NA Maximum lasing time (sec) NA Emergency Stop offer Key Control offer Beam Shutter have Stand By Mode not offer Activation Warning not offer Malfunction Warning Xenon lemp,water presure,lack of presure warning Remote Control have Viewing Window OD not offer Protective Housing not offer Interlock on Protective Housing not offer Hazard Class 4 class Labels welding